rasterweb
rasterweb avatar

rasterweb

@rasterweb@kbin.social

I moved to fedia.io (which runs mbin) because it seems to work without constant errors.

You can find me at: https://fedia.io/u/rasterweb

Made an enclosure for my beepy. I think enclosures are my favourite part of printing (lemmy.world)

I grabbed a beepy a little while back (if interested BE ADVISED: they’ve since gone dark and left a bunch of people holding out for one, I got really lucky and ordered super early) so I could work on some python stuff on the go. I didn’t like having all the parts exposed, and the cases available seemed too flimsy for my...

rasterweb,
rasterweb avatar

Looks good! I'd guess 80% of my printing is enclosures. ;)

rasterweb,
rasterweb avatar

The design for this one was a digital drawing (though sometimes it's just analog/paper) and I then 3D printed a plate and did a relief print using a Provisional Press. (I'm also really into rainbow rolls lately!) I make my own paper and this is from a recent batch. (I recycle our shredded paper at home.) The frame is 3D printed and I designed that as well.

rasterweb,
rasterweb avatar

Here's a post (and some photos) about the paper I make: https://rasterweb.net/raster/2023/12/19/handmade-paper/

rasterweb,
rasterweb avatar

Thanks! Yeah, I really had fun making paper last month so now it's time to print on all of it. (And then I'll make some more!)

rasterweb,
rasterweb avatar

The frame is 6" x 6" and the print is just a bit smaller than that.

rasterweb,
rasterweb avatar

Thanks! I've though about doing more... I started working on a trash can icon yesterday and I'll see where it takes me.

rasterweb,
rasterweb avatar

I ended up moving from kbin.social to fedia.io which runs mbin and has a team, not just one person. (kbin.social kept breaking all the time for me.)

GarlicOS failure

I fired up the Anbernic RG35XX this morning and it worked fine for a bit and then started flashing and games would launch and then immediately quit. The whole screen was flashing / blinking. I tried the stock OS on the original SD card and it worked fine. I ended up doing a fresh install of GarlicOS on a new SD card and that was...

rasterweb,
rasterweb avatar

Is this about letting Nazis speak on UW campuses?

rasterweb, to pico8
rasterweb avatar

So I'm thinking this PICO-8 community could use a list of resources. I'm pretty sure I've seen an "awesome" list as well as a list of links on (ahem) another link aggregator site... If no one else compiles one, I may end up doing it.

Solder Board - a soldering aid for adding pins to boards (www.printables.com)

I created what I am calling a “Solder Board” which is like a breadboard but with no internal connectors. The solder board is used for soldering of course. Specifically, for soldering pins onto PCBs, and in this case, onto microcontrollers.

3D Printed Solder Board
  • All
  • Subscribed
  • Moderated
  • Favorites
  • anitta
  • ngwrru68w68
  • hgfsjryuu7
  • InstantRegret
  • Youngstown
  • rosin
  • slotface
  • everett
  • mdbf
  • ethstaker
  • kavyap
  • thenastyranch
  • DreamBathrooms
  • PowerRangers
  • Leos
  • magazineikmin
  • Durango
  • cubers
  • GTA5RPClips
  • cisconetworking
  • tacticalgear
  • osvaldo12
  • khanakhh
  • vwfavf
  • tester
  • modclub
  • normalnudes
  • provamag3
  • All magazines