3DPrinting Top

Cable clip for 3M command tabs. Please use M size command tab.

The crown is a 3D printed replica of the crown from the movie The Green Knight, starring Dev Patel as Sir Gawain. Absolutely loved the costume design in that movie. Incorporating the halos depicted around royalty in illuminated manuscripts and other artworks into the crowns themselves to infer divinity was just so fucking cool...

cross-posted from: merv.news/post/130483...

English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the airflow by computer simulation. The nine openings draw in the dust that accumulates around...

I added a hole to be able to release the clip after it clicked. No other changes to it. The original part: https://www.thingiverse.com/thing:2594163 The idea for the hole: https://www.thingiverse.com/thing:5364218

We actually ran out of Forest tiles at the very end, so I had to break out the Gloomhaven upgrade tree. Need to make 6-8 more

Printed with two PETG filaments on a glass bed with hairspray. Printed the black lines (with a custom end code that doesn’t turns off motors) then printed the white over it in a separate gcode (also with custom start with no homing). It even allows me to go with an exact and cut off hairs and blobs before laying the white....

I modeled an object in Blender intending to print it, but when I import it into PrusaSlicer or Cura, the dimensions don’t quite match....

I didnt know what happened, but I knew that I had some problems in the last weeks which I thought I fixed. The rods where to dusty which resulted in the X-Axis skipping. I cleaned thhe rodes and sprayed some Teflon grease on thm, as usual. Maybe something got into the electronics box and the grease isnt as non-conductive as I...

I’ve been getting some problem layers with this filament, especially on flat pieces like this. The first layer is always good, but flat layers (top and bottom) that are not on the bed are not great, like the filament is sagging and not connecting to the lines next to it, regardless of if they are supported or not. This one was...

I’ve just finished tweaking this Leman Russ proxy, inspired by the very original model released for Epic back in the 80s. It’s designed to be easy to print in FDM (no supports required for printing), the one pictured was printed on a stock Ender 3....

I tried just about every suggestion here, but still couldn’t get an airtight print. This is transparent PLA. I’m going to play with my speeds and overlap to try to get it clearer, but it was dimensionally accurate and completely sealed the first try....

View without the ereader for those who are interested...

Not 100% sure this counts as a functional print, since I purchased acrylic mirrors for this and cut them down. What I 3d printed were the templates for cutting the mirrors and the shell for holding it all together in the right shape and protecting it so my niece can play with it without breaking it....

Printed in PLA on a Flash Forge Creator Pro.

Got a new Crosstrainer and wanted to be able to easily mount my iPhone on it. On Amazon every fitting piece was around 35€. I had an old MagSafe Ring laying around, so I designed the mount around it, glued everything together and strapped it to my Crosstrainer using a cable tie. Works perfect!...

Needed to print some very special 380mm tall items, so decided to modify my ender 2 to print very tall prints. it works surprisingly well, and the bad resonance only kicks in at about 390mm!

This holder can allocate 8 wide USB sticks, 8 SD cards, and up to 15 MicroSD cards. Ideal for your desk, to keep your portable storage in a single place when you need them. It has holes to prevent from dust accumulation, and reduce a little the material used to print it. * This design is an improvement to USB and SD card holder...

Here is an adapter to fix common broom in UE. This adapter is designed for 20mm ID stick, and 20mm OD coarse thread (tapered). Can be reinforced as pictured with 4 screws (here: thermoplastic Pozi 3x10) Voici un adaptateur pour réparer un modèle de balai très répandu en Europe. Il est conçu pour s'adapter à un manche de...