For secure data destruction, either pay for it to be done properly, or create your own way of doing it. A decent sized drill bit can do all the work for you, at the cost of a new drive of course.
If it’s really an issue where “if the data on this SSD falls into the wrong hands, lives will be ruined” sort of thing, my favorite data security tool for this job is a bench grinder. Difficult to put the data back together when the flash chips are powder scattered throughout 14 different shop surfaces and at least two lungs.
A special feature known as SSD secure erase. The easiest OS-independent way is probably via CMOS setup – modern BIOSes can send secure erase to NVM Express SSDs and possibly SATA SSDs.
Thanks for this informative answer. Then it would make sense that it took only 1 second, then again, I have a modern Asus motherboard (AM5) with a Western Digital NVMe drive, and that drive isn’t listed as Secure Erase compatible on Asus motherboard. I will download the WD dashboard and do it that way, I didn’t know it existed before I posted this question.
Most SSD/flash secure erase methods involve the storage having full disk encryption enabled, and simply destroying the encryption key. Without the encryption key the data can’t be deciphered even with the correct password, as the password was only used to encrypt the encryption key itself. This is why you can “factory reset” an iPhone or Android in seconds.
It is the only approved method for data destruction for the several banks and government agencies I support. If they trust it, I trust it.
I have checked a couple of times out of curiosity, after a secure erase the drive is as clean as if it had been DBANed. Sometimes things are standards because they work properly.
This is the correct answer. Due to wear levelling, a traditional drive wipe program isn’t going to work reliably, whereas most (all?) SSDs have some sort of secure erase function.
It’s been a while since I read up on it but I think it works due to the drive encrypting everything that’s written to it, though you wouldn’t know it’s happening. When you call the secure erase function it just forgets the key and cycles in a new one, rendering everything previously written to it irrecoverable. The bonus is that it’s an incredibly quick operation.
For all average user requirements that just involve backups, PII docs, your sex vids, etc (e.g. not someone who could be persecuted, prosecuted, or murdered for their data) your best bet (other than physical destruction) is to encrypt every usable bit in the drive.
Create a new veracrypt volume on the mounted exFat partition that uses 100% of available space (any format).
open up a notepad and type out a long random ass throwaway password e.g. $-963,;@82??/@;!3?$.&$-,fysnvefeianbsTak62064$@/lsjgegelwidvwggagabanskhbwugVg, copy it, and close/delete without saving.
paste that password for the new veracrypt volume, and follow the prompts until it starts encrypting your SSD. It’ll take a while as it encrypts every available bit one-by-one.
Even if veracrypt hits a free space error at the end of the task, the job is done. Maybe not 100%, but 99.99+% of space on the SSD is overwritten with indecipherable gibberish. Maybe advanced forensics could recover some bits, but a) why the fuck would they go to that effort for a filthy commoner like yourself, and b) what are the chances that 0.01% of recoverable data contains anything useful!?! You don’t really need to bother destroying the header encryption key (as apple and android products do when you wipe a device) as you don’t know the password and there isn’t a chance in hell you or anyone else is gonna guess, nor brute force, it.
You can’t fill the drive. The drive decides when to use its buffered free storage blocks. It’s at the hardware level and only the Secure Erase command will clear it.
a) why the fuck would they go to that effort for a filthy commoner like yourself, and b) what are the chances that 0.01% of recoverable data contains anything useful!?!
Nobody is gonna bother doing advanced forensics on 2nd hand storage, digging into megabytes of reallocated sectors on the off chance they to find something financially exploitable. That’s a level of paranoia no data supports.
My example applies to storage devices which don’t default to encryption (most non-OS external storage). It’s analogous to changing your existing encrypted disks password to a random-ass unrecoverable throwaway.
Are you considering using the drive afterwards? Because “toss it in a microwave for like 5 minutes” is always a valid answer if you’re not worried about reusing it.
This article covers several methods. Personally, I’d look for a BIOS based tool first, as that would be free and easiest. After that, the Diskpart Clean All command is probably fine for anything other than Top Secret data which a government based threat actor would be willing to put a lot of resources into recovering. If it’s just your tax documents and porn archive, no one is going to care enough to dig out anything which that command might have left behind.
Add comment