Posts

This profile is from a federated server and may be incomplete. Browse more on the original instance.

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

After about 6 months, I finished up a guitar I built for my 16yr old kid. We used maple (which is heavy, but sturdy). It's a Telecaster body style, and he picked out the electronics. We're both pretty happy with how it turned out!

Wood being clamped together
Guitar body with copper shielding
Guitar with the pick guard off, showing off the wires

ubo,
@ubo@social.tchncs.de avatar

@karlnelson ๐Ÿ‘๐Ÿผ Beautiful work and I am sure it sounds great too!

mcfly,
@mcfly@milliways.social avatar

@karlnelson like super nice. But more importantly how does it sound?

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

Using winding sticks to see if this 18 foot long spar bench is flat and level.

Next up: mast glue up.

karlnelson,
@karlnelson@mastodon.world avatar

@mcfly hereโ€™s a cross section where you can see the four layers.

mcfly,
@mcfly@milliways.social avatar

@karlnelson nice thank you.

Will you document the process of making it too? What kind of boat is that for?

karlnelson, to Seattle
@karlnelson@mastodon.world avatar

So Iโ€™m at a French bistro in and four mimes just walked in and theyโ€™re having dinner and gesticulating wildly and this is the best thing ever.

garland,
@garland@social.seattle.wa.us avatar

@karlnelson @adam The only acceptable kind of smoking inside a restaurant.

bedirthan,
@bedirthan@dice.camp avatar

@garland @karlnelson @adam I wish I was at Karl's dinner.

It would have been more fun than 60% of the Sounders game

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

friends:

Say you had a 17 ft long board, and you wanted to make several rip cuts. (And fairly thin rips -- about 30mm.)

Let's also posit that the table saw you have access to is in a room that isn't going to accommodate a board that long.

What would you do?

Track saw?

Rajiv,

@karlnelson all good suggestions. Bandsaw with outfeed support would be my choice. Very curious about your project though...what would require 17' long thin strips? Do share when you can.

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

With the vise done the workbench is officially complete!

Planing stop on a workbench
Holdfast holding down a board

karlnelson,
@karlnelson@mastodon.world avatar

@ottaross โ€œcrubber" actually (https://benchcrafted.com/products/crubber). It came with the vise hardware.

On the advice of the author of the book I followed (https://lostartpress.com/products/the-anarchists-workbench), I used epoxy to attach it. But, I'm sure contact cement would work just fine, too.

ottaross,
@ottaross@mastodon.social avatar

@karlnelson aha - that's a product I hadn't seen before. Thx for the link.

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

Workbench holes successfully drilled. The holdfast does indeed hold things fast. (Itโ€™s a tight fit, so Iโ€™ll likely need to fine tune it.)

karlnelson, to random
@karlnelson@mastodon.world avatar

A point on the road for the . Iโ€™ll take it. Nashville never looked really dangerous. The next couple of home games will tell the tale of the season.

bedirthan,
@bedirthan@dice.camp avatar

@karlnelson six unbeaten and people are still down on the team. I don't think they'll care if the team earns six points this weekend too.

Second place is now considered failing.

karlnelson,
@karlnelson@mastodon.world avatar

@bedirthan yeah. I saw one of their more complete (minus a goal) recent performances yesterday. Effective pressure on defense. Decent movement/ideas on offense. And they were missing some of the regulars (Rusnak, Morris, Raul), and a few folks had off nights (Chu). So, encouraging for a playoff run.

(Also: some people are just never happy no matter what happens. ๐Ÿคทโ€โ™‚๏ธ)

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

Figuring out how to level out the end grain on the bench top sides isโ€ฆnot fun.

I made cuts with a circular saw from the top and bottom and used a handsaw to cut out the middle.

Iโ€™m taking suggestions for good ways to deal with it. So far my hand planes are slow going. Sanding would take forever. Resaw? Chisel? Fire?

Rajiv,

@karlnelson What I have done is for my #4, I have three blades that are sharpened at different angles. lower angle helps with endgrain. but amount of clean up you have to do, belt sander is going to take you there faster & then you can take care of high spots with plane.

karlnelson,
@karlnelson@mastodon.world avatar

@Rajiv different angles is a good idea.

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

Never enough clamps!

karlnelson, to math
@karlnelson@mastodon.world avatar

I've got an open role in my department at Illustrative Mathematics (https://illustrativemathematics.org/). (We're a in working to improve .)

Title: IT Coordinator
Location: Remote, US
Salary range: $65k - $80k.
Details and application: https://illustrativemathematics.applytojob.com/apply/WejaaiXYrN/IT-Coordinator?source=mastodon

karlnelson, to woodworking
@karlnelson@mastodon.world avatar

I wasโ€ฆnot expecting that chisel to be so big. ๐Ÿคฃ๐Ÿ˜ฌ (The biggest of the drill bits is an inch wide, for scale.)

Jason844,

@karlnelson
<Insert 'That's Not A Chisel. This Is A Chisels' Joke/Meme/etc Here>

๐Ÿ™ƒ

karlnelson, to random
@karlnelson@mastodon.world avatar

How many fouls is Chicho going to commit before the ref shows him a card?

GWillow,

@adamcsmith @karlnelson I hate this team. Just shithousery and dirty fouls and shitty fans

adamcsmith,
@adamcsmith@ioc.exchange avatar

@GWillow @karlnelson Its kinda always been that way too! At least they're consistent??? :)

karlnelson, to MLS
@karlnelson@mastodon.world avatar

I don't really care about the All-star game, other than thinking that last year's pairing with the Liga MX All-stars was more fun. But, I'm 100% here for the skills challenge that happened yesterday. Watching players do silly soccer things... yes, please.

(I might care more about the game if more were involved, but mostly I just want to make sure none of the guys get hurt playing an exhibition game.)

bedirthan,
@bedirthan@dice.camp avatar

@karlnelson I want an East v West or World v. USA/Canada format soon

karlnelson,
@karlnelson@mastodon.world avatar

@bedirthan Iโ€™d be down for that.

karlnelson, to random
@karlnelson@mastodon.world avatar

This is getting a little nervy for the . Gotta make sure this doesnโ€™t get out of hand. And the Sounded have looked decent in the attack, except for, and stop me if youโ€™ve heard this, the actual scoring of goals.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • โ€ข
  • JUstTest
  • kavyap
  • DreamBathrooms
  • cisconetworking
  • Durango
  • mdbf
  • magazineikmin
  • ethstaker
  • osvaldo12
  • rosin
  • Youngstown
  • slotface
  • everett
  • tacticalgear
  • megavids
  • thenastyranch
  • ngwrru68w68
  • modclub
  • cubers
  • normalnudes
  • InstantRegret
  • GTA5RPClips
  • tester
  • khanakhh
  • provamag3
  • anitta
  • Leos
  • lostlight
  • All magazines