3D-Printed USB Dead Man Switch (Prototype Demo) (www.buskill.in)
Today we’re ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen....
This magazine is from a federated server and may be incomplete. Browse more on the original instance.
Today we’re ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen....
First time I printed something made in FreeCAD. It’s a table lamp for our balcony, more like a mood light than a real lamp hehe. Its made from 3 parts (base, tube and a hat). Base and tube are CA glued and I used some insulating tape to fit a hat tightly. The lamp is about 240 mm tall and its powered from 9V battery. Battery...
cross-posted from: ttrpg.network/post/4222671...
Assembly Bill A8132 has been assigned a “Same As” bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023]...
Awesome to see that Bambu and the X1 Plus devs are talking.
Hey, this is my first Printables contest entry - large (16 inch/40 cm) christmas balls that print in multiple pieces. They can be assembled is hollow frameworks, or around a playground ball for extra color.
In my day our memes were in two dimensions, which was the style at the time...
Want to keep your filament dry while you print, but too cheap to shell out for a dry box? Make your own! My house goes through Tidy Cat tubs at a rapid rate, and they seal pretty well. I was using a PVC pipe structure on the inside, but I think these skate bearing roller stands will work better. Throw in a few desiccant...
Got lazy but have posted once about my Extruder being the reason why Octoprint or Firmware is not starting the Print....
I created a Lemmy logo keychain for everyone to enjoy!...
Prusa MINI is getting Input Shaper and Pressure Advance! No idea when it’s gonna be released as a stable version, but still quite exciting news for MINI owners (at least I was definitely waiting for Input Shaper)....
Normally slopes on my prints look fine, but recently I’ve been getting bad extrusion on some prints but not all. Same materials, same print file. Could this be one of the motors starting to fail? Printed on an ender 3....
cross-posted from: merv.news/post/130483...
We’re happy to announce that we were successfully able to initiate a BusKill lockscreen trigger using a 3D-printed BusKill prototype!...
This is an “Unauthorized Personnel Only” sign that I made using my Future n0t Found typeface. It is briefly referenced in my cyberpunk short story, “Keep Portland Wired,” which is being republished in The Big Book of Cyberpunk, coming out in September 2023....
cross-posted from: lemmy.antemeridiem.xyz/post/123877...
https://lemmy.world/pictrs/image/ff5ba9ac-74fd-45fd-b9b4-f9340ac086b7.webp...
https://lemmy.world/pictrs/image/1cc24c73-eb0c-430c-9237-70fdc283a56f.jpeg...
Hey, I'm a complete newbie when it comes to 3D printing. I have a chance to pick up this printer second hand, and I was wondering what the community thinks of the product. Would this printer be decent for a beginner? Thanks!
Everyone raves about the organic supports, but I've been using the beta for the improved, multidirectional cutting tool.