@masukomi@connectified.com
@masukomi@connectified.com avatar

masukomi

@masukomi@connectified.com

👉 Senior Back-End Dev. Seeking Remote Position 👈

Autodidactic, Autistic, ADHD, Trans, and Geeky Programmer.

Queer friend of Camellia Sinensis.

If you want to hear my ramblings about Tabletop Role Playing Games check out my other account: https://dice.camp/@masukomi

This profile is from a federated server and may be incomplete. Browse more on the original instance.

whitequark, to random
@whitequark@mastodon.social avatar

i got an Infiray C200+ handheld FLIR and wow this thing is so good

it's built very solidly and clearly for people who need it to do their jobs. actually usable UI, high refresh rate, good resolution, very usable, 10/10. worth a lot more than the 200 GBP or so they sell it for

pictured: my headmate's filament dryer box with heating elements clearly visible

masukomi,
@masukomi@connectified.com avatar

@whitequark a) cool b) what does headmate mean? Is it DID related?

🤔 Either way, it just occurred to me that people with DID have next-level budgeting problems.

masukomi, to random
@masukomi@connectified.com avatar

POV you are a tiny thing being observed by a Maine Coon cat for 20 seconds

A 2 second video taken from just above a Tabletop. There is a gray and beige Main Coon cat staring almost directly into the lens. She observes closely and then sits up straight the camera pans up to her, and then she dismisses it and looks away.

masukomi, to random
@masukomi@connectified.com avatar

I got my foot back, but now the cat has my bra and headphones.

She is about a foot away from me on the table and purring loudly

jsit, to random
@jsit@social.coop avatar

Eric Trump said of his father, "He's the toughest man I've ever seen; he endures this nonsense every single day."

By no definition of the word does he "endure" it! He screams and whines and intimidates witnesses and jurors. Having a tantrum is literally the opposite of enduring something!

If this is "enduring" it, what would it look like not to endure it?

masukomi,
@masukomi@connectified.com avatar

@jsit well, if he gets elected again, he’ll have the nuclear launch codes and I am pretty sure he has has suggested they should be used so it’s pretty easy to predict…

masukomi,
@masukomi@connectified.com avatar

@jsit as a reminder there is nothing legally or procedurally, preventing the US president from throwing a hissy fit and launching nuclear weapons at anyone they feel like

masukomi, to random
@masukomi@connectified.com avatar

The dog has claimed my foot

saramg, to random
@saramg@fosstodon.org avatar

Star Trek TNG 3x16 The Offspring (The one where Data builds a daughter).

SHUT UP!
I'M NOT CRYING, YOU ARE!

masukomi, (edited )
@masukomi@connectified.com avatar

@saramg once upon a time (when the show was still running) i knew a woman whose sister was the person in charge of getting everyone a their script. She asked me what episode i’d like her to send me a script from. I chose that one.

🤔now I’m wondering where that script ended up.

masukomi,
@masukomi@connectified.com avatar

@saramg lol. Nice

masukomi, to random
@masukomi@connectified.com avatar

Found a pic from yesterday afternoon

masukomi, to 3DPrinting
@masukomi@connectified.com avatar

Bambu Studio claims this is going to work. I have my doubts, but I'm willing to give it a try.

masukomi,
@masukomi@connectified.com avatar

@SebastianM6L 🤞 hoping you're right.

masukomi,
@masukomi@connectified.com avatar

For those of you who were curious. This was the end result.

I should have known, because I printed a thinner version of this months ago, the core idea is 👍 BUT everything goes wrong as soon as you get past the thin side sections. The second photo shows what they look like head-on.

Here's the thread where I was exploring a minimal manual support technique with the prior version, debugging it, & what it took to print: https://connectified.com/@masukomi/112060578105212098

#3DPrinting

a screenshot from the slicer showing what it looks like head-on. You can see a horizontal trianglular hole with its left tip flattened in the middle of a tall rectangular plane. To the left and the right of the triangle are two thin stretches of material that just aren't enough to keep everything stable while printing.

masukomi,
@masukomi@connectified.com avatar

@logicalmoody the Bambu X1-C is a truly impressive machine. It’s changed everything for me. Old one constantly needed fiddling

masukomi,
@masukomi@connectified.com avatar

@Natanox @logicalmoody I honestly don’t think the problems have anything to do with a printer, although I do think that a bed slinger would be worse because I theorize it would induce more wiggle.

From my testing last time ( see the toot i linked in my reply to myself), it really does seem to just be an artifact of those two skinny sections

tillybridges, to trans
@tillybridges@mastodon.social avatar

Welcome to !

You may not know this, but in 2022 the largest survey of transgender Americans happened, and in February of 2024 the early report was released!

So let’s take a look at THE 2022 US TRANS SURVEY RESULTS, part 1 (of 2)!

https://docs.google.com/document/d/e/2PACX-1vQ0EvoSGUfsZNHBeURuJDMFd3E8lJL32gvFjygSlE0xoah86fBXVE2uOcdKV5ei26rODmJFoO2DLciC/pub

masukomi,
@masukomi@connectified.com avatar

@tillybridges i'd be willing to bet good money that the 23% who reported they didn't know if they were intersex were also autistic, because everyone else just assumes they're not until proven otherwise , but an autistic person would answer directly with their known truth, which is usually "how would I know? I haven't been genetically tested or had my internal organs checked out"

masukomi, to random
@masukomi@connectified.com avatar

The windows are open again. The dogs are thus seeking shelter beneath me.

masukomi, to 3DPrinting
@masukomi@connectified.com avatar

I hate the standard stair-step look of a angled surface. Watching a "Need it Make It" video triggered an idea.

By making the surface a shallow sine-wave we can introduce a wavy pattern in something that still looks & feels like a "flat" angled plane.

Second image shows the dimensions I found most visually appealing.

a screenshot of a sketch of the sine-wave. It is 4mm wide & 0.3mm high. That's it.

masukomi,
@masukomi@connectified.com avatar

i should note that the angle of your inclined plane plays into the look a lot. As with the stair-step look, the more shallow the angle the farther the waves will be spread from each other.

I would suggest that you're probably going to have a lot more value from playing with the width of the sine wave than the height.

If the sine waves get much taller than this, the eye starts noticing the ridges more than the pattern.

masukomi, to random
@masukomi@connectified.com avatar

holy 💩! DAYS after updating the "Social Preview" for - at least 3 - GitHub FINALLY started serving up the image instead of the default stuff.

BUT I made a "it works just give it time" post with a link, only MINUTES after having it work in a DM, and guess what? IT'S NOT WORKING... but ..it is... sometimes?

I dunno what's going on with this.

masukomi,
@masukomi@connectified.com avatar

@jwarlander I linked to a specific line of code in a DM and it worked. Then I linked to the repo and it didn't. I force refreshed. Nothing.

Same browser. Minutes apart.

So ... maybe but also it feels like there's something else at play here.

masukomi, to random
@masukomi@connectified.com avatar

I have no idea if this comic is any good, but i love the title and cover

danirabbit, to random
@danirabbit@mastodon.online avatar

Converse has some pretty sweet customization options for their pride shoes. One thing I thought was funny though is you can add text on the back that says “Proud to be _” but you only get 6 characters so “lesbian” doesn’t fit lmao. But you can get a lesbian flag on the tongue so that’s dope https://www.converse.com/shop/p/custom-chuck-taylor-all-star-pride-by-you-unisex-low-top-shoe/165809CSU24_black.html?metricId=5387765556&styleNo=A11207C

image/jpeg

masukomi,
@masukomi@connectified.com avatar

@danirabbit i used to love converse but ultimately had to stop wearing them because i really need wider shoes than they offer :(

masukomi,
@masukomi@connectified.com avatar

@danirabbit hmm it was ages ago that i abandoned them. Maybe that’s new? If not i was never able to find it back then. I gave up thinking they just didn’t care about anyone with wider feet.

Thanks for pointing it out. I may give them a try again

demi, to random
@demi@witches.social avatar

started playing assassin's creed valhalla, because i really enjoyed odyssey, and im finding it a very different game in terms of the mechanics. skill tree is much more difficult to parse and thus builds are harder to have. i'm a little miffed that i am penalized for killing priests while raiding.

masukomi,
@masukomi@connectified.com avatar

@demi i’ll murder who i want gods damn it!

😉

hannah, to random
@hannah@posts.rat.pictures avatar

Sorry, large numbers of what

masukomi,
@masukomi@connectified.com avatar

@hannah Damn Regulations. This is what [checks notes for current scape-goat] the woke dems have taken from us!

(Hopefully obviously 100% joking 😉)

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • megavids
  • everett
  • Durango
  • mdbf
  • magazineikmin
  • InstantRegret
  • rosin
  • modclub
  • Youngstown
  • slotface
  • thenastyranch
  • cubers
  • kavyap
  • DreamBathrooms
  • JUstTest
  • khanakhh
  • GTA5RPClips
  • osvaldo12
  • ngwrru68w68
  • normalnudes
  • cisconetworking
  • Leos
  • ethstaker
  • tester
  • tacticalgear
  • provamag3
  • anitta
  • lostlight
  • All magazines
    •