TIL: An automation trigger can be "Time of your phone's next alarm" and now I can automatically turn on two WLED and one proprietary RGB lighting automatically when I have a wake up alarm set on my phone and my phone is at home.
Hat hier jemand Erfahrungen wie gut ein ESP32 verkraftet ein IBeacon zu sein und gleichzeitig einen Temperatur/Feuchtigkeitssensor zu betreiben und beides per MQTT zu pushen?
Help required with Home Assistant, boosts much appreciated!
I'm trying to get my Deebot integrated following this tutorial: https://deebot.readthedocs.io/integrations/home-assistant/examples/ui/advanced/
I know where to place the scripts and automation, but where do I put everything else, especially the button_card_templates and the dashboard stuff? All the things I find online relate to the old yaml-based config and not the new ui-based one. Thanks in advance! #smarthome#homeassistant
Hilfe mit Home Assistant benötigt, Boost wäre super!
Ich versuche meinen Deebot in HA zu bekommen und folge diesem Tutorial: https://deebot.readthedocs.io/integrations/home-assistant/examples/ui/advanced/
Ich weiß, in welche yaml Script und Automation müssen, aber wo genau müssen die button_card_templates und der Rest danach hin? Alles, was ich im Netz dazu finde, läuft noch mit der alten yaml-basierten Konfiguration, aber nicht mit der neuen UI-basierten. Danke schonmal! #smarthome#homeassistant
🙏 A plea for lean software
💽 PocketBase is a backend in 1 file
🏭 Vanna AI framework for text-to-SQL
💭 Henrik Karlsson on what to focus on
🏡 Calvin Wankhede’s offline smart home
🎙 hosted by @jerod
Kennt jemand ein günstiges Messgerät, dass die Oberflächentemeratur einer Wand messen kann und mit #ZigBee funkt? So als Ergänzung zu den Raumtemperatursensoren zur Messung des Verhaltens von Wärmebrücken. #HomeAssistant#SmartHome#Dataisbeautiful
CES 2024 showcased technology that's designed to make homes smarter, safer and more efficient. @theverge roamed the show floor halls to find the best gadgets for every room in your home. https://flip.it/8atLqi #Tech#CES#SmartHome#TheVerge#Technology
Ist es möglich bei einem Schließzylinder eine Not- und Gefahren-Funktion nach zu rüsten ohne den Schließzylinder komplett zu tauschen? Alternativ auch ein Knauf, aber dafür werden wohl mehr Teile benötigt.
Auf der Innenseite soll ein #Nuki#Smartlock angebracht werden und die Tür soll trotzdem noch von außen schließbar sein
Y’ever follow a hashtag and then months later realize you have enjoyed maybe two of the two thousand posts you’ve seen from that hashtag? Me and #smarthome. No offense to those that follow it lol
I really want to get back into hobby electronics in 2024. This Home Assistant hub will hopefully help stimulate that. I plan to integrate the CircuitPython + MQTT gadgets I built for the lizard and fish tanks to begin with, then maybe pull data from our solar power system, put in an air quality monitor, maybe some outside weather sensors, etc.
I think today is a good day to move from #ZHA to #Zigbee2MQTT. 😅
40 devices are in my #Zigbee network, so this will probably take some time. But I don't have to work today and my wife is in the office so this is probably the only day in the next week this will be possible.
It's just annoying how slow the development and device compatibility of ZHA progresses. It was good for a quick start back then but as my network grows the limitations become more visible.
Ok, I give up. "Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
Tried pretty much everything except the pretty useless "USE ANOTHER DONGLE". My Sonoff dongle is compatible and it works like a charm with ZHA.
I sadly have no time to try more as the migration, even if Z2M would work instantly now, would cost so much time and I don't have this anymore because of the troubleshooting.
Sad. I heard many good things about Z2M and really wanted to try it. Now one of my free days has lost some hours with no success and I'm mad, why good things in #HomeAssistant still have to be so complicated.
I just hope #ZHA will get better over time. I don't think I have the option to try #Zigbee2MQTT again for the next months.
To begin the new year, I've been getting started with Home Assistant. It's a bit like taming a wild bear to be your personal pet.... you know that if/when you're ever done you'll have something incredibly powerful, but the process to get there is probably gonna be extremely painful if it doesn't outright kill you.
Does anyone have experience with the Tuya/generic Thermostatic radiator valves? I want to replace my dumb ones with them, but I'm not sure how they would integrate with the existing thermostat.
I was thinking to change the thermostat to tado, who have their own TRVs, but those are quite expensive.
Is it possible to use HomeAssistant to integrate the the generic Zigbee TRVs with a "branded" thermostat?
Check out the latest of the #homeassistant#podcast where Phil and I talk to Jasper about running a smart hotel and home! Another example of taking Home Assistant to another level!
#homeassistant as a Proxmox VM on a fanless small PC with UPS. Slae.sh Zigbee stick, IKEA, Aqara/Xiaomi sensors and bulbs. A Xiaomi Gateway 3 for controlling BLE Mesh bulbs. A couple of Sonoff Wifi switches running ESPhome. Daikin AC, noname Tuya Zigbee thermostatic valves, Xiaomi standing fan, air purifier and an old Gen 1 Robot Vacuum. Vocolinc humidifier. Sonos speakers, Samsung TV, Kodi running on Pi 4, 4 different Amazon Echo devices. Everything integrated into HA.