Każda osoba na instancji #mastodon Pol.social ma konto #matrix na serwerze Pol.social
Logowanie do Matrixa odbywa się przez połączony profil Mastodona.
Prościej nie potrafiliśmy tego zrobić :)
Więc posiadając konto na #polsocial wystarczy wejść na https://chat.pol.social i zalogować się przez profil mastodon Pol.social.
(Uwaga, inne formy logowania nie działają!)
Hallo Fediverse! Bitte um Rückmeldung + Ergänzungen: Übersichts-Tabelle mit Fediverse-Diensten, Vergleichsdiensten und Funktionen
Ich schreibe einen Artikel über den #FediverseFachtag und in dem Rahmen natürlich auch über das #Fediverse . Zielgruppe sind Leute, die wahrscheinlich zum Großteil noch gar nix vom Fediverse gehört haben.
Dazu bin ich dabei, eine Tabelle zu erstellen, in der einige Fedi-Dienste sowie deren Haupt-/ besondere Funktionen aufgeführt werden sollen.
Das ist der derzeitige Entwurf:
"ähnlich wie..."
Ein Vergleich mit kommerziellen Plattformen ist natürlich immer nur zum Teil passend. Ich kenne auch keinen der kommerziellen Dienste aus eigener Erfahrung, aber für die avisierte Zielgruppe kann so ein Vergleich vielleicht trotzdem eine hilfreiche Orientierung sein. Vielleicht gibt es da aber auch Vergleiche, die passender sind. Einige Dienste (bspw. Medium, Podigee) kannte ich auch noch nicht mal vom Namen her, sondern habe das nur aus ähnlichen Vergleichstabellen übernommen.
Zu den "besonderen Funktionen":
Insbesondere Friendica, Firefish und v.a. Hubzilla haben so viele Funktionen, dass diese im Rahmen der Tabelle nur exemplarisch aufgeführt werden können und die Auswahl ist subjektiv. Hier wäre die Frage, ob das eine passende Auswahl ist, ob besonders wichtige fehlen oder ob andere Funktionen wichtiger oder besonderer sind.
Wenn Ihr also Anregungen oder Ergänzungen habt, gerne her damit! Danke!
Onward, #fedivoyage! This is the last stop; afterwards @blinry and I will wrap it up and look back.
I will take a look at #plume, a "blogging application". This means it's an alternative to #writefreely, which we visited approximately one year ago. So let's see!
📰 Jak aparat bezpieczeństwa kształtuje kontrolę czatu?
"Ukrywana dotąd przez Komisję Europejską lista, którą publikujemy, pokazuje, jak przedstawiciele tajnych służb i policji angażowali się w prace nad kontrolą czatu i to już na wczesnym etapie. Dużą rolę odegrała także przypominająca start-up organizacja Thorn.
Podczas pracy nad rozporządzeniem dot. kontroli czatu Komisja Europejska współpracowała ściśle nie tylko z kontrowersyjną organizacją Thorn, ale także z przedstawiciel(k)ami Europolu, australijskiej i hiszpańskiej policji oraz brytyjskiej agencji wywiadowczej GCHQ."
If an actor provides an outbox URL, but not an inbox URL, it means that it cannot receive Follow activities and it can not push content to the followers. In such cases, the follower's server should switch to periodic polling like RSS.
This will enable statically-built blogs ( #jekyll#hugo etc) to appear in Mastodon network.
👉🏾 According to @RobertJBateman obtaining IP addresses & even usernames (via Federation‽) sans consent could violate #EuropeanUnion 🇪🇺 law 😱
👉🏾 A privacy policy may or may not be enough
👉🏾 If not compliant, I will migrate my #Mastodon, #Misskey & #Pixelfed instances out of #Europe.
Mostly, it was because I was having domain issues that seemed too much of a pain in the ass to troubleshoot, and I decided that deleting was ultimately easier than figuring out a fix.
What can I say? I'm lazy.
But ultimately, I'd rather put all that stuff on the #Fediverse anyway.
Sure, I can't make everything look just so. But I think the truth is that most people don't care about the aesthetics of my blog theme. They care much more about receiving my messages.
When not considering themes, there's not much of a difference between maintaining a blog and updating a Fediverse account -- especially when you consider that so many platforms already support Markdown and HTML.
I'll go even further. #WriteFreely is a blog platform that has #ActivityPub integration out of the box. It works well.
And if you want a full CMS suite, both #WordPress and #Drupal are capable of being federated with an ActivityPub plug-in and they're getting better all the time.
At this point in time, I don't even want to blog without federation capabilities. That would be like opting for a unicycle instead of a bicycle. Sure, a unicycle is fun but not very practical.
If a key part of blogging is the practicality of being read -- but initiating dialogue -- then federation is extremely important. And it's becoming more and more important each day.
Having second thoughts about my self-hosted #Mastodon instance, it’s just too much of a resource hog for a single user / small instance on a 4 core / 4G vServer if you want to run other stuff (#writefreely is live, #pixelfed to be installed!) as well. On the other hand it is very nice that the software is stable, reliable and well designed. So either I need to move to a bigger server or decommission my self-hosted profile and look into other options for micro / macro blogging self-hosting again. I did like #gotosocial but the current version doesn’t install on my #yunohost properly. Tried #Akkoma and #Pleroma - weren’t my thing, can’t get over the design. I do like #Friendica and its possibilities but it is a bit clunky at times and I have some doubts if protocols other than the quasi standard #ActivityPub have much of a main stream future which kinda could make the additional Friendica features a little islandish. Same applies to #Hubzilla which I only start testing. Leaves #Misskey and #Calckey which could be good options but not sure about the reliability and gameplan there, I don’t want to tinker every night on my server so #Calckey probably need to become a little more stable first, #Misskey seems to have no current version on YunoHost, so need to explore other install options… Any thoughts very welcome! @fediversenews@fediversede
Hello again #Fediverse, I may need your #fedihelp. So, here's a list of the Fediverse software I'm about to make temporary accounts for to test all the features and differences:
So, did I miss anything noteworthy? Does anyone have any tips or recommendations before I choose a server for any one of these? I'll probably be going for the most popular server on each for improved federation and maintenance.
Note: I'm using #Sharkey right now and Misskey forks are already overrepresented, so that's why it's not included.
I've heard reports that users on #Lemmy aren't able to interact with #WriteFreely blogs. Can anyone help test / verify that something is up so we can fix?
👉🏾 #Meta can/will use RSS, crawlers & “pings” to analyze our content, making FediBlocking useless
👉🏾 Engage friends, family, etcetera, who join #Threads (Instagram’s #ActivityPub powered proxy) from your #Misskey, #Mastodon, #WriteFreely, #Pixelfed, #WordPress, et al, accounts
👉🏾 If 10% of Fediverse is not on Zuckerverse, we can win
Miło nam poinformować, że od dzisiaj serwer https://WriteFreely.pl czyli instancja #WriteFreely prowadzona przez @to3k korzysta z infrastruktury hostingowej (vps) naszej fundacji.
Jeśli zauważycie jakieś problemy prosimy o kontakt z działem @pomoc
Dziękujemy Tomasz za zaufanie i sprawne przeprowadzenie migracji 👍
--
Twój projekt lub inicjatywa potrzebuje wsparcia? Chcesz wykorzystać oprogramowanie Open Source i naszą infrastrukturę oraz pomoc w projekcie, wdrożeniu i eksploatacji?
Research has continued and I think that #WriteFreely, despite being a great piece of software, isn't really accurate for my needs and is a bit too restrictive.
#Hugo might be more what I need, so I'll look at upgrading to that at some point. I just need to work out how to self host it!
does anyone know of any good fedi front end clients that are tailored towards long form blog posts? i want to turn todiy into a multi media platform, and not just microblogging, but i don't wanna have to run a separate server/subdomain for every format! I think i like the idea of using #GoToSocial as a backend because it seems pretty flexible! i dont want my users to need a bazillion accounts lol. Im looking at #writefreely , and it would be awesome to use its front end somehow. #fediadmin
As an experiment I would like to try to maintain a blog by exporting threads from Mastodon to a more static format.
I hoped I could find a CLI tool resembling MastoReader, but no luck. Turns out it was really easy to do in quick and dirty Perl. So this is my new blogging pipeline:
I think we should slightly rethink how login works on most Fediverse apps (Mastodon, Lemmy, but not only)
A while ago I posted a thread back on the...